ROK

• Sharp triple ground teeth for faster cutting • Heat treated hardened teeth for long lasting sharpness • Ergonomic design handle for maximum comfort • Handle design provide 45 and 90 degree angle guides

• 8 Holes • Qty. 10 Discs • Resin bonded aluminum oxide backed with quick and easy change hook and loop fastening system.

• Heat treated hardened teeth for long lasting sharpness • three cutting edges on each tooth for fast smooth cuts • 7 TPI, Ideal for pruning and general carpentry

• Set includes 12 hole saws (3/4in, 7/8in, 1-1/8in, 1-1/4in, 1-1/2in, 1-3/4in, 2in, 2-1/2in, 3in, 3-1/2in, 4in, 5in) • 3/8in Arbor with pilot bit • 1/4in Arbor for saws up to 1-1/8in • Arbor plate • Hex wrench

• CR-V • Color coded for easy identification • Square: #0 yellow, #1 green, 2 x #2 red, #3 black • Phillips: #1 yellow, 2 x #2 red, #3 black • Slot: 1/4” blue

- Heavy duty die cast aluminum body -2 Vials with plumb and level readings - Solid block acrylic vials - Milled edge for higher accuracy - Powerful rare earth magnets - Accuracy: 0.5mm / 0.029°

Includes 32 PC screwdriver bits: - Slot 1/8ö, 5/32ö, 3/16ö, 1/4ö, 9/32ö- Square #0, 2 x #1, 3 x #2, 2 x #3- Phillips #0, 2 x #1, 3 x #2, 2 x #3- Torx T10, T15, T20, T25, T27, T30, T40- Hex 9/64ö, 5/32ö, 13/16ö, 1/4ö

• Sold in 12-piece display box • Includes square recess bits • Quick change magnetic bit holder • Square: 2 x #1, 4 x #2, 2 x #3 • Phillips: #1, 2 x #2, #3 • Pozi: #1, #2, #3 • Hex: 4 mm, 5 mm, 6 mm, 3/32in, 5/32in, 7/32in • Slot: 3/16in, 1/4in • Torx: T9, T10, T15, T20, T25, T27, T30, T40

• Ratcheting screwdriver • 36-Piece screwdriver bits: Square: 2 x #0, 2 x #1, 4 x #2, 2 x #3; Phillips: #0, 2 x #1, 2 x #2, 2 x #3; Pozi: #1, #2, #3; Slot: 7/64in, 5/32in, 3/16in, 1/4in; Hex: 5/32in, 3/16in, 7/32in, 1/4in; Torx: T9, T10, T15, T20, T25, T30, T35, T40

Cr-V • Magnetic Tip • Go-Thru steel shank safely withstands hammer impacts • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

Cr-V • Magnetic Tip • Go-Thru steel shank safely withstands hammer impacts • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

Cr-V • Magnetic Tip • Go-Thru steel shank safely withstands hammer impacts • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

Cr-V • Magnetic Tip • Go-Thru steel shank safely withstands hammer impacts • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

Cr-V • Magnetic Tip • Go-Thru steel shank safely withstands hammer impacts • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant • Includes: Slot 3/16” x 4”, Slot 1/4” x 4”, Phillips #1 x 4”, Phillips #2 x 4” Square #1 x 4”, Square #2 x 4”

Cr-V • Magnetic Tip • Go-Thru steel shank safely withstands hammer impacts • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant • Includes: Slot 3/16” x 4”, Slot 1/4” x 4”, Phillips #1 x 4”, Phillips #2 x 4” Square #1 x 4”, Square #2 x 4”

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant • Includes: Slot 3/16” x 4”, Slot 1/4” x 4”, Phillips #1 x 4”, Phillips #2 x 4” Square #1 x 4”, Square #2 x 4”

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant • Includes: Slot 1/4” x 1-1/2” Slot 3/16” x 4” Slot 1/4” x 4” Phillips #2 x 1-1/2” Phillips #1 x 4” Phillips #2 x 4” Square #1 x 4” Square #2 x 4”

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant • Includes: Slot 3/16” x 4”, Slot 1/4” x 4”, Phillips #1 x 4”, Phillips #2 x 4” Square #1 x 4”, Square #2 x 4”

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant • Includes: Slot 1/4” x 1-1/2” Slot 3/16” x 4” Slot 1/4” x 4” Phillips #2 x 1-1/2” Phillips #1 x 4” Phillips #2 x 4” Square #1 x 4” Square #2 x 4”

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant • Includes: Slot 1/4” x 1-1/2” Slot 3/16” x 4” Slot 1/4” x 4” Phillips #2 x 1-1/2” Phillips #1 x 4” Phillips #2 x 4” Square #1 x 4” Square #2 x 4”

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant • Includes: Slot 1/4” x 1-1/2” Slot 3/16” x 4” Slot 1/4” x 4” Phillips #2 x 1-1/2” Phillips #1 x 4” Phillips #2 x 4” Square #1 x 4” Square #2 x 4”

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant • Includes: Slot 1/4” x 1-1/2” Slot 3/16” x 4” Slot 1/4” x 4” Phillips #2 x 1-1/2” Phillips #1 x 4” Phillips #2 x 4” Square #1 x 4” Square #2 x 4”

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

• Cr-V • Magnetic Tip • Ergonomic comfort grip handle • Bi-material handle is impact and slip resistant

Ideal for quickly connecting air tools; 1/4ö NPT; 3 - Truflate 3/8" Plug - Male; 1 - Truflate 3/8" Coupler - Female; 1 - Truflate 3/8" Plug - Female

• 1/4”, 3/8”, 1/2” • 1/4” Hex shank

• Ideal for cleaning all types of paint spray guns, airbrushes and other thin tubes and nozzles • Includes: • 1 Plastic handle nylon brush • 1 Nylon end brush • 1 Nylon tube brush 11-1/2” x 7/16” • 1 Nylon tube brush 6” x 3/8” • 1 Nylon tube brush 6” x 1/4in • 1 White nylon tube brush 9” x 7/16” • 5 Mini nylon tube brushes • 6 Cleaning needles

• Designed for autobody and light industrial jobs • Fine spray adjustment • Drip proof container • Average air consumption: 14.5 cu ft / min • Operating pressure: 50 to 70 psi • Nozzle size: 2.0 mm • Capacity: 1 L

Anodized body will not rust or corrode; Diagonal edge has markings for laying out rafters, roof trim and stair angles; Can also be used as a saw fence or cutting guide.

- Anodized aluminum frame, will not rust - Highly visible permanently stamped graduations - 1/8”, 1/10”, 1/12”, 1/16” Graduations - Rafter, Brace & Essex Tables; Octagon scale

• cut and strip 10-22 AWG copper or aluminum wire • crimp insulated and non-insulated 10-22 AWG terminals • shear and thread common size electrical screws

- Cut and strip 10-22 AWG copper or aluminum wire - Crimp insulated and non-insulated 10-22 AWG terminals - Shear and thread common size electrical screws - Includes assorted crimp terminals and connectors

- 3” X 300FT

- 3” X 1000FT - Contractor Grade

- 3” X 1000FT - Contractor grade

- 3” X 300FT